The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, exceptional and rich CMY color mixing and can be run from the built-in dimmer or from an external dimmer.

FEATURES

• Total output up to 14200 lumens

• CMY color mixing system

• Rapid stobe effects (up to 10 Hz)

• Motorized zoom

• Fresnel (included), narrow, and multi array

• Internal & external electronic dimming plus mechanical dimming

• 80 V dimmer for universal operating voltage

• Patented very low-noise cooling

• Various front accessories for theatre, television and film applications

SPECIFICATIONS

PHYSICAL

Length: 454 mm

Width: 362 mm

Height: 709 mm, head straight up

Weight: 26.8 kg, IGBT dimmer model

Weight: 27.4 kg, 80 V dimmer model

DYNAMIC EFFECTS

Color mixing: CMY, independently variable 0 - 100%

Electronic dimming: Multi-voltage IGBT and 80 V internal dimmer options, 'plug and play' external dimming

Mechanical dimmer: 0 - 100%Shutter:

Strobe effect up to 10 Hz, random strobe

Zoom: Narrow 14.5° - 27°,

Standard 20° - 41°,

Very wide 97° - 105°, 1/10 peak angles, 80 V lamp

Pan: 540°

Tilt: 242°

CONTROL AND PROGRAMMINGDMX channels: 14/20

Setting and addressing: Control panel with display16-bit control: CMY, mechanical dimmer, electronic dimmer, zoom, pan & tilt

Movement control options: Tracking and vector

Dimming curve options: Various available

Protocol: USITT DMX512-AReceiver: Opto-isolated RS-485Firmware update: Serial upload via DMX link

LAMP

Type: 1200 W tungsten halogen

Approved lamps: Philips 1200/115, 1200/230 or 1200/240 FastFit,

OSRAM Lok-It 1200W 80V/32/P50

Socket: PGJX-50

Lamp voltage must match internal or external dimmer output voltage:

DIMMING SYSTEM OPTIONS

Internal multi-voltage IGBT dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX

Internal 80 V dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX

External dimmer input: Intelligent lamp power control

CONSTRUCTION

Color(s): Black

Housing: Magnesium alloy, UV-resistant fiber-reinforced composite

Reflector: Glass, cold light

Protection rating: IP20

INSTALLATION

Orientation: Any

Mounting points: 2 pairs of 1/4-turn locks

CONNECTIONS

AC power input: 3 m integral cable without power plug

DMX data in/out: 3-pin and 5-pin locking XLR

External dimmer: Neutrik PowerCon

ELECTRICAL

AC power: 100-120/200-240 V nominal, 50/60 Hz

Power supply unit: Auto-ranging electronic switch-mode

Main fuse: 20 AT (slow blow)

TYPICAL POWER AND CURRENT

115 V, 60 Hz: 1226 W, 10.7 A, PF 0.998

230 V, 50 Hz: 1220 W, 5.3 A, PF 0.995

240 V, 50 Hz: 1233 W, 5.2 A, PF 0.996

230 V, 50 Hz using internal 80 V dimmer: 1219 W, 5.5 A, PF 0.970

230 V, 50 Hz using external dimmer, figures for fixture only: 93 W, 1.0 A, PF 0.420

Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:

THERMAL

Lamp cooling: Patent-pending low noise ducted forced air system

Cooling: Filtered forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C

Minimum ambient temperature (Ta min.): 0° C

Maximum surface temperature, steady state, at 40° C ambient: 200